Details 8Cr14MoV Steel Review

What is 8Cr14MoV Steel?

8Cr14MoV Steel is an extremely stainless steel with a high carbon content. After the heat treatment, which is different according to the manufacturer the steel has a high degree of hardness, excellent wear resistance, and excellent resistance to corrosion. A lot of knife makers utilize this steel to create budget knives.

8Cr14MoV Steel knives do not provide the same performance as top-quality steel knives, but they’re good at the cost. Don’t be dejected of the performance of these knives due to their low cost when compared to the cost of high-end steels.

Due to the substantial proportion of chromium in the composition of 8Cr14MoV, it is a stainless steel, providing excellent resistance to corrosion.

In addition to the knife making process This steel is utilized in different industries to create surgical instruments, tools for cutting and cutting edge dies.

8Cr14MoV Steel Composition

  • Carbon C 0.75 percent: Improves edges retention and hardness, and tensile force. It also improves resistance of steel against wear, scratching, and corrosion.
  • Chromium Cr 14.00 percent: Chromium increases the hardness, tensile strength and the toughness of blades by forming chromium-carbide. The greater than 13 percent Cr is the reason why 8Cr14MoV is “stainless”
  • Molybdenum Mo 0.25 percent is a material that improves machinability and the hardening property.
  • Manganese Mn 0.50 percent: increases the hardness and strength of steel. When steel is heated and hardening is enhanced, it will be able to do so with an increase in manganese.
  • Vanadium V 0.15 percent: Improve durability and wear resistance and also enhances the resistance to corrosion.
  • Cobalt Co 2.50% Improves the hardness of blades as it enhances martensitic transform heat of the alloy. it also enhances the corrosion resistance of steel.
  • Sulphur 0.015 percent: Enhances the steel’s machinability, but it can reduce the strength of steel in large amounts.
  • Silicon 0.50 percent: Enhances grain structure and durability, however, as Manganese it may increase the brittleness.
  • Tungsten WW 3.00 Percentage increases hardness and wear resistance, typically added to the tool steel.
  • Phosphorous P 0.035 percent: Enhances the hardness, but is considered as an impure.

Properties of 8Cr14MoV Steel

8Cr14MoV Steel Hardness

8Cr14MoV stainless-steel hardness ranges from in the range of 58-59 HRC according to the Rockwell hardness scale. The hardness is high enough to ensure its blades have excellent edges, sharpness in addition to wear resistance.

Additionally, the toughness of 8Cr14MoV blades is different in accordance with the process employed for manufacturing by the maker.

8Cr14MoV steel Edge retention

8Cr14MoV stainless steel keeps an edge that is sharp for a long time which is among the qualities that make knives made of this material shine despite their low costs.

With the high degree of hardness due to Carbon and chromium composition, the blades made of this steel will remain sharp for a long period of time even after repeated usage.

8Cr14MoV steel Wear resistance

The substantial amount of Carbon as well as chromium and vanadium provide it with a higher wear resistance than the other budget steels.

Blades made of this steel can stand up to rough and abrasion applications. So, you can rely on 8Cr14MoV’s blades made from stainless steel that will last you for many years.

8Cr14MoV Toughness

The strength of steel is crucial in determining the way it responds to hard applications, which could lead to breaking or chipping. 8Cr14MoV stainless steel is a good durability due to the presence of molybdenum and chromium that make up its composition.

8Cr14MoV steel knives are able to endure moderate abuse. They are best used in regular cutting tasks. If they are exposed to batoning or other difficult cutting tasks that are extremely tough, they’ll crack and chip in a short time.

8Cr14MoV Steel Resistance to corrosion

As a stainless-steel that has over 16% of Chromium, 8Cr14MoV steel has a high resistance to corrosion. Blades can be used of this steel in wet, humid, or marine conditions without worry about corrosion or stains.

This is the reason for this characteristic that stainless steel is favored for the production of knives for kitchen use as well as EDC knives. In addition, to increase its resistance to corrosion, daily maintenance and cleaning is crucial. Clean and dry the blades following use.

The ease of sharpening 8Cr14Mov steel

8Cr14MoV steel is hard although it’s not hard enough for it to be difficult to polish. It is possible to get a sharp edge using this steel fast with a few tools to sharpen it.

If you’re in the lookout for a budget knife that doesn’t require regular sharpening and is simple to sharpen, the options of 8Cr14MoV are sure to please you.

8Cr14MoV Steel Compares. Other knife steels

8Cr14MoV vs D2 Steel

The primary difference between 8Cr14MoV and D2 steel lies in the fact that 8Cr14MoV steel is stainless steel, while D2 is considered to be semi-stainless. 8Cr14MoV, therefore, is superior to D2 steel with regard to stain and corrosion resistance.

D2 steel, on its own is superior than 8Cr14MoV in terms of durability and edge retention. It does this due to the fact that it has greater proportions of carbon within its alloy.

8Cr14MoV is a softer steel than D2 steel. It has more durability as well as being less likely crack or break in tough environments. The tougher 8Cr14MoV steel is similar with AUS 8 steel as well as Vanadis 8 Steel.

8Cr14MoV vs 8Cr13MoV

8Cr14MoV as well as 8Cr13MoV is a Chinese manufactured steel nearly identical in chemical composition. They also have the identical hardness, sharpness durability as well as wear-resistant. But 8Cr14MoV is richer in chrome, which means it is more resistant to corrosion than 8Cr13MoV steel.

8Cr14MoV Steel vs AUS 8

8Cr14MoV can be described as Chinese steel, whereas the AUS8 steel type can be described as Japanese steel and is, therefore, it is considered to be a premium steel with more Carbon. More Carbon results in better performance in wear-resistant, edge retention, and toughness.

But, they do not share the same degree of durability. For corrosion resistance, AUS 8 steel is superior. AUS 8 steel has more Chromium elements in its alloy composition, which means it can provide more corrosion resistance.

Is 8Cr14MoV Steel good knife Steel?

8Cr14MoV is a good knife steel that falls in the budget category. It has an even balance of toughness, hardness, edge resistance, wears resistance, and excellent resistance to corrosion.

The price may entice you to believe that 8Cr14MoV knives have poor quality, but you’ll be amazed at how they can last for many years.

But, don’t subject them to the same pressure or hard application as they would be knives constructed of top-quality steel.

About the author

Hi, my name is Jaba Ray. I'm a knife expert and researcher. I am the creator of, your one-stop site for everything related to knives. I love people who need suitable steel or knife for their cook because I'm also a food lover. I work with a team of people who've always had a passion for knives and blades on this site.

Leave a Comment